+ 86-23-63089919 send a message                  

1kzte Injector Pump Removal

by:Wingoil     2020-10-20

This atomic interaction creates gamma rays that are then measured within the software via devoted detectors, and interpreted via a calibration to a porosity. A larger variety of gamma rays collected on the device sensor would indicate a larger number of interactions with hydrogen atoms, and thus a larger porosity. The logging tool, also referred to as a sonde, is located at the finish of the wireline. The measurements are made by initially reducing sonde utilizing the wireline to the prescribed depth and then recorded while raising it out of the nicely. The sonde responses are recorded repeatedly on the best way up making a so-referred to as 'log' of the instrument responses.

Because of their size, these cables can be utilized in pressurized wells making then particularly suited to cased gap logging actions under stress. The subsurface geophysical and petrophysical info leads to the description and evaluation of subsurface geology, reservoir properties and manufacturing characteristics. Browse all of our featured listings from all categories on the positioning and discover tips on how to get your organization featured here. (vi) Internal self-closing cease valves that fail to close or that permit leakage through the valve detectable without the usage of instruments. (iv) Rubber hose flexible connectors with any condition outlined in paragraph (g) of this part.

Using a CBT, the bond between the casing and cement as well as the bond between cement and formation can be decided. Using CBT data, a company can troubleshoot problems with the cement sheath if needed. This software should be centralized in the nicely to operate correctly. The NMR measurement made by both a laboratory instrument and a logging software follow the identical rules very closely. An important function of the NMR measurement is the time wanted to accumulate it.

However, the longer occasions require either lower logging velocity or much less frequent sampling. Formation porosity is decided by putting in a radiation source capable of emitting quick neutrons into the downhole environment. Any pore areas within the rock are filled with fluid containing hydrogen atoms, which sluggish the neutrons right down to an epithermal or thermal state.

All sources of leakage should be correctly repaired prior to returning a tank to hazardous supplies service. The employer retains a duplicate of the tester's skills with the paperwork required by § a hundred and eighty.417(b). In addition the one that signs the inspection report required by § 180.417(b) of this subpart for such non-bulk tanks just isn't required to be registered. Self-closing pressure reduction units not examined or failing the checks in paragraph (j) of this section must be repaired or replaced.

The rigidity on the road assures that the depth measurement may be corrected for elastic stretch of the wireline. None of these are constants, so the correction needs to be adjusted repeatedly between when beginning the logging operation to recovery to the reference level (often floor, or zero depth level, ZDP). First developed by Conrad and Marcel Schlumberger in 1927, wireline logs measure formation properties in a nicely via electrical strains of wire. Wireline devices can measure a bunch of petrophysical properties that form the premise of geological and petrophysical evaluation of the subsurface. Wrapped around a drum on the again of a truck, the slickline is raised and lowered in the nicely by reeling out and in the wire hydraulically.

Any person performing thickness testing should be skilled within the proper use of the thickness testing gadget used in accordance with the manufacturer's instruction. The inspector should record the outcomes of the pressure test as laid out in § a hundred and eighty.417(b). (vii) All closures besides stress aid units should be in place in the course of the test. All prescribed loading and unloading venting units rated at lower than take a look at strain may be eliminated during the take a look at.

In a log, there's a commerce-off between the time wanted for polarization and acquisition, logging pace and frequency of sampling. The longer the polarization and acquisition, the more full the measurement.

Single-conductor cables are comparable in building to multi-conductor cables but have only one conductor. The diameters are normally much smaller, ranging from 1/10' to 5/sixteen' and with suggested working loads of 800 to 7,735 lbf.

(i) Damage to the hose cowl that exposes the reinforcement. No operator could use a delivery hose assembly determined to have any condition recognized under for unloading liquefied compressed gases. An operator might remove and exchange broken sections or right defects found. Repaired hose assemblies could also be positioned again in service if retested efficiently in accordance with paragraph (f) of this part. The operator should visually inspect each delivery hose assembly at least as soon as every calendar month the supply hose meeting is in service.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...