info@wingoil.com         +86-23-63089919         Send A Message

30 tons of ceramsite sand dust sand pressure tester, 30 t compressive strength testing machine, plastic sand resistant to compression performance testing equipment

by:Wingoil     2020-04-30
Product name: electric hydraulic type compressive bending machine ( 30 t) Product model: YAW - 300 product range: 0 - 300 kn product description: used for cement mortar, concrete, tile, steel tubes, the compressive strength of man-made board and so on various materials, or compressive flexural test of 30 tons of press scope of application: applicable to the cement products, concrete, paper box, manhole covers, iron ore pellets, tubes, hollow brick, stone, refractory materials, metal materials and nonmetal materials such as rubber bearing, the red brick of the compressive strength and compressive flexural test, are roads, railways, Bridges, construction, building materials, colleges and universities, and other industries indispensable laboratory equipment. 30 tons of press function use: this machine is mainly used for concrete, the flexural strength of test specimens and cement mortar and the red brick building materials such as compressive strength test. The machine adopts hydraulic loading, electronic load, a load digital display, load rate, load value remains, and remaining functions such as overload protection and power data. 30 tons of press technology parameters: the YAW model - 300 test force 300 kn test force or less relative error value & plusmn; Hydraulic pump pressure rated 1% 25 mpa bending roll diameter & phi; 30 mm spacing between bending roll up and down 165 mm center distance between the two bending roll on 150 mm center distance between the two bending roll under the 450 mm bearing plate size & phi; 155 mm spacing between upper and lower clamp piston diameter and 230 mm trip & phi; 125 mm * 80 mm motor power three-phase 0. 75 kW envelop dimensions ( Length x width x height) 850 x 620 x 1340 mm of about 500 kg net 30 tons of press use notice: 1 computer operation must be in accordance with the instruction content the system connection is good, and check the correct before electricity. Add lubricant to tester activity parts before 2 boot. 3 do test before, must ensure preheating system more than 20 minutes, so as to affect the minimum temperature drift. 4 in the process of test, if the tension over the instrument calibration value, then the system load alarm is given, at this time as long as cut off the load, then press 'reset' button, can remove overload alarm. 5 electricity no display, please check the fuse, power socket and power switch. 6 show abnormal or reset does not respond, please contact the manufacturer or the system back to the factory, one year free repair. 7 after the test, cut off power supply first, then to make clean processing machine surface. 30 tons of ceramsite sand dust sand pressure tester, 30 t compressive strength testing machine, plastic sand resistant to compression performance testing equipment
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...