+ 86-23-63089919 send a message                  

Pacific Hydrostar Shallow Well Pump

by:Wingoil     2020-08-19

This hydrostatic test pump system is designed to permit the operator to securely check gear at excessive pressures inside a blast chamber. The management panel consists of pneumatic controls which function a separate pump unit which may be mounted inside test space. This design isolates pumps and output strain parts away from the operator. Buckhorn has a fleet of digital deadweight to use as a certified gauge or deadweight for hydrostatic testing.

The Crystal gauge is among the most dependable correct gauges in the trade. All gauges are rated to 10,000 PSI and are ± .02% accurate at lower than 20% of full scale. The gauge and test hose may be configured in quite a lot of methods. Blind flanges are bolstered ridges used to seal the end points of pipe or vessel openings and are generally used for testing the move of fuel or liquid by way of lively pipelines. These flanges have particular stress scores, together with one hundred fifty, 300, 600, and 900 sequence, wanted to run easily.

This pump is designed to check giant quantity tools up to 500 PSI. This is a reasonable air operated take a look at pump primarily used to test hose assemblies. This light-weight double performing pump can be easily carried to the testing area. It is provided with a 50 gallon fluid reservoir, fill pump, and high pressure pump. The skid may be built to offshore specs, with lifting eyes and forklift slots.

These providers make the most of dependable digital and mechanical gear to safeguard present pipelines. There are quite a lot of instruments to select from when conducting crucial hydrostatic exams. As you can see in determine 2, the pipes are placed on the stands, and the pump and strain gauge is ready, which makes up for a complete hydro take a look at setup. However, care needs to be taken in transporting the pipe from the testing facility to its designated location of use in order to not get any deformities within the pipe after testing.

There are no shortcuts in the pipeline industry since tools inspection requires meticulous and ongoing supervision. Every valve on the equipment have to be rated greater than the pressure on the line. For occasion, applying a pump capable of 10,000 kilos per square inch (PSI) to a pipeline capable of solely 5,000 PSI is an improper software. Offshore solutions embrace services corresponding to prep-crew, hydrostatic, and pipeline testing, development, bolting and rigging crews, dewatering, flushing, and drying.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...