info@wingoil.com         +86-23-63089919         Send A Message

Pressure Test Facility

by:Wingoil     2020-08-16

Proof checks and exams to failure must additionally use procedures allowed by relevant codes or requirements. If no relevant code or normal exists, the test process should be reviewed and accepted by the Division. Except the place stress tested in accordance with (d), elastic materials must not be gasoline examined at pressures above sixty seven% of the minimal specified yield level at test temperature.

In any case, operators and inspectors should think about the properties of the hydrotest fluid medium and the way the medium might impact the tools. For example, water is an effective environment for corrosion to take place. Therefore, equipment ought to be correctly dried and contaminant free earlier than starting operations.

(H) Pressurization shall be stopped at intervals to examine stress gage (s) and place of check plug (s). (D) The plug have to be of the right dimension and stress rating, together with any limitations on the take a look at fluid or check temperature. It should be inserted for full length of engagement, in accordance with the plug producer's directions. The rules of applicable Codes or Standards shall be used for hydrostatic, pneumatic or combination hydrostatic-pneumatic testing.

Brittle supplies should not be gasoline examined above forty% of the minimal specified final strength with out remote operation and missile shielding. “Brittle Material” is outlined for this part as having a minimal specified elongation of four% or less.

The working areas have to be kept away from debris and all switch equipment must be protected from physical damage. Transfer shall be carried out only throughout daytime until the switch space is supplied with a lighting system and which supplies at least 5 foot candles of illumination at all points of operations. (I) The take a look at pressure shall be decreased to zero earlier than the plugs are loosened for elimination.

New inline inspections and integrity administration systems allow operators to understand the complexities and economics of terminals’ and station’s complex aging pipeline infrastructure. Welding imperfections vary in impact from being acceptable to requiring repair. It is essential to ensure the quality of welds using NDT and to make sure the power of the whole piping system with hydrotesting.

Chant Engineering has a full line of hydrostatic check stands ranging from small, medium, giant and mega capability. We also produce custom check stands and different customized products for industrial and industrial functions. The massive chamber is pressurised, electrically driven water pump which may pressurise the chamber to a maximum price of 58psi per minute. There are a maximum of twenty-two 25 mm penetrations for electrical, hydraulic, pneumatic, and instrumentation.

Chant Model 9000C is a Pneumatic Test Station which is air and water operated; it consists of a pneumatic take a look at station and a ballistic water tank. Chant Model K Hydrostatic Test Station Horizontal Stand is hydraulically operated. It consists of a Hydraulic Power Unit (HPU), a Hydrostatic Test Station and a Hydrostatic Water Console.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...