info@wingoil.com         +86-23-63089919         Send A Message

Pump Air Hydro Test System

by:Wingoil     2020-08-10

This LOW-PRESSURE HYDROTEST PUMP is made of solid aluminum with stainless-steel pistons and a 0–a thousand psi strain gauge. Hydrostatic testing is the commonest method to check if there’s a leak in pressure containing equipment and helps maintain security standards and durability of pipelines or storage vessels over time. Testing is important for storage and transport gear because such containers can explode in the event that they fail underneath strain. P Series Pump - Suitable for all hydrostatic testing purposes.

Portable pump for testing tubes, pipes and stress vessels in the subject or shop. Step 4 applies when using a hose with quick-disconnect couplings, which characteristic a one-way valve designed to detach the hose from the pump while maintaining system strain. Inspectors of fireside sprinkler and standpipe techniques need to confirm that the system being tested stays pressurized without help from the pump. Disconnecting the hose offers quick visual confirmation that it's the pipes, and not the pump, sustaining stress.

If the temperature drops low enough, the moisture can convert to ice, causing a total failure from the system. There are several types of pressure check that can be utilized, with pneumatic testing utilizing air or an inert gas like nitrogen to pressurise the pipeline to a hundred and ten% of its intended design capacity.

Provide a strain vessel that may allow the relief valve to be set a minimum of 25% above the maximum system pressure. Today, we will go over why you would possibly contemplate investing in a liquid filled gauge vs a dry one. Dry strain gaugesare the work horse of the industrial and commercial parts world. Many industrial machines and even a number of the fancier bicycle pumps may have a dry gauge. The dial can become obscured by moisture inside the gauge.

When testing pipelines utilizing this method, the vessel in question might be full of water to help establish any potential leaks, mechanical deficiencies or subtle changes of shape when immersed. Dyes may also be added to the water to help detect leaks instantly, while you should be sure that all welding has been completed and verified earlier than finishing up the hydrostatic take a look at.

The more air or water there is in relation to the container it is in, the upper the strain. So, a small pipe with 10 gallons of water in it'll have larger pressure than a bucket with 10 gallons of water in it.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...