+ 86-23-63089919 send a message                  

Universal Pressure Test Kit

by:Wingoil     2020-07-29

Fully manual operation is out there by selecting that mode of operation. The Large Pipe Test Enclosure has been designed to completely enclose specimens being examined up to the maximum strain output of the Hydraulic Pressure Unit, 15,500 PSI. Test pressures for the product are entered by way of the contact display screen. The pumps are sized to get the check specimen to pressure as efficiently as attainable. The Small Pipe Test Enclosure has been designed to completely enclose specimens being tested up to the utmost pressure output of the Hydraulic Pressure Unit, 15,500 PSI.

Stand Mounted Recorders are available to assist with documenting take a look at performance of equipment being examined with all styles of High Pressure Test Units. These are provided in 15,000, 20,000 and 30,000 PSI models full recording protection.

Chant Engineering Model 9727 is a 10,000 psi Hydrostatic Test Stand, used to test large take a look at specimens. It consists of a Hydraulic Power Unit (HPU), a Hydrostatic Test Station, a Horizontal Stand and a Hydrostatic Water Console. A convenient fill port is provided for the addition of make up water every time wanted.

Some job websites construct makeshift shields from wooden and make sure personnel are as far away from the site of strain testing as attainable. However, within the occasion of an explosion or flying particles, these strategies present ineffective blast containment and do very little to protect individuals on the job website or the surrounding properties. The space of purposes ranges from freely programmable check methods for R&D labs to push-button simplicity. With its extended temperature vary from -20 °C to a hundred and twenty °C (4 °F to 248 °F) and V/L ratios starting from zero.02/1 to 100/1 it can address the most tough measurement scenarios in addition to with routine analysis.

The building of our blast panels additionally lets you hyperlink a number of panels together for total safety and blast containment throughout strain testing. And in contrast to some other high-pressure testing enclosures, our blast shields at TM International are additionally environmentally pleasant and recyclable. At TM International, we conduct rigorous testing on all of our products. During our testing, TM International blast shields and walls were capable of sustain a collection of 9,000-psi air blasts — that amount of intensity is equal to that of a bomb going off.

Unsurpassed for accuracy, reliability and safety, the advanced know-how of AccuTEST was developed to check safety valves while in place, under a full load, for persistently superior, reproducible results. Test stress reduction valves whereas in place to attain persistently superior, reproducible results.

In combination with a 12 V DC adapter it can be even run by a automobile battery, allowing vapor strain testing in the subject. Recent enhancements within the design of ERAVAP led to an improved repeatability and reproducibility for vapor strain testing. With a repeatability of solely r ≤ 0.15 kPa and a reproducibility of R ≤ zero.50 kPa for ASTM D5191 and D6378 reference materials at 37.8 °C (a hundred °F) it clearly outperforms the precision statements of its personal ASTM standards.

Hydro exams are often required after shutdowns and repairs to be able to validate that tools will function underneath desired conditions as soon as returned to service. Use the fantastic regulate piston alone to create pressure as much as 400 inH20 (four hundred mbar). Use the compressed fuel from the inner cylinder to go to pressures from 400 inH20 to 3000 psi (200 bar).

The pump fills at approximately ½ gallon per minute and might pressurize as much as 10,000 psi. Chant’s take a look at tools is used within the military, aerospace, lifting & rigging, and oil and fuel industries all around the globe. In addition to the hydrostatic stress test facility, there's a 6m deep tank out there for moist commissioning or full-scale interface exams. The tank is 9 meters wide and 10 meters lengthy enabling full ROV techniques be examined. nondestructive testing method, tools can rupture and fail if the inspection exceeds a specified test pressure or if a small crack propagates rapidly.

If testing is to be carried out within the upper two thirds of scale and 1% full scale accuracy is appropriate, then the analog gauge is should suffice. Digital gauges come standard with peak learn feature and selectable items of measure (psi, inHg, cmHg, mmHg, kPa, mPa, Bar, kg/cm2, ftH2O). In automated mode, take a look at recipes will be entered by an AMP server, after the person enters the check info.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...