Pressure Test Safety Chamber
The pressure test cabin is a device that plays an important role in the high pressure test process. The hydraulic pressure is very high up to 690MPa, and the gas pressure is up to 480MPa, when pressure test, blasting and fatigue tests are carried out on pipes (hard pipes, hoses), gas cylinders, casings and cylinders, valve parts, petroleum equipment, fire-fighting tools, etc. The higher the pressure, the larger the size of the pressure test device, and the greater the destructive force is during the test. Therefore, when performing stress testing, not only the accuracy and reliability of the test data are required, but also the safety and controllability of the test are required.
Propose a plan
The project team mainly focuses on the design and the selection and composition of each functional module of the remote automatic control, pressure test monitoring system, protective cabin safety hazard, alarm system, hydraulic unit, and discuss the proposals.
Technical design features
5. The hydraulic unithas an automatic temperature control system,which means when the temperature of the hydraulic oil is too high, the cooling system is started, and when the ambient temperature is too low, the heating system is started. Additionally, a liquid level controller, a temperature controller and a pressure transmitter are installed in the fuel tank, and the operating parameters of the fuel tank can be monitored in real time.