+ 86-23-63089919 send a message                  

Hydraulic Hand Pump With Reservoir

by:Wingoil     2020-09-13

Customized pumps may be packaged with controls, frame, or equipment to satisfy your application necessities. A extensive number of hydrostatic check pump choices can be found to you, such as auto testing machine, compression testing machine. Supplied with a management block of up to 25 bar (Control block as much as 60 bar is available). The Control Block could be left on the circuit being examined meaning the pump can then be used to pressurise one other circuit by use of a second accent management block.

With a protracted lever, it simply takes forty seconds to achieve three,000 psi (200 bar). A high-high quality screw press is designed for fantastic strain adjustment, with an adjustment decision up to 10 Pa (zero.1 mbar).

This hydrostatic take a look at was carried out on a Fire Sprinkler System utilizing the prototype of the TP-1 Hydrostatic Test Pump. The sprinkler system was put in in a two story office building. The system was stuffed up to regular metropolis strain of roughly a hundred and twenty psi. The TP-1 Hydrostatic Test Pump by Aimpoint Associates has turned the hydrostatic check pump market the wrong way up.

This unit is a stress take a look at system supposed for pressure testing 5,000-, 10,000-, and 15,000-psi-rated pressure management gear to most working strain before performing intervention work. The unit is meant for use in ATEX Zone 1 hazardous environments and complies to NORSOK rules. The Model Series Pump is right for hydrostatic testing and tube growth utilizing TestMaster® Hydrostatic Test Tools or ExpanTek® Tube Expansion Tools.

Send us your enquiry for 200bar/3000psi Hand Operated High Air Pressure Test Pump – ADT920 to get help with this product kind. A specially designed shut-off valve makes the stress as stable as attainable during calibration. A built-in fuel-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. The 920 High Pressure Test Pump is a hand operated pressure pump designed to generate strain from ninety five% vacuum to 3,000psi (200bar).

Any hose that is deemed substandard will must be repaired or replaced. Hydrostatic testing of fire hoses is an important aspect of any fireplace system inspection and, using a hydrostatic test pump, it determines the hearth hose’s serviceability and security. Hydrostatic testing may be harmful and should solely be done by skilled personnel using correct instruments and procedures. General Fire and Safety of Omaha performs fireplace hose testing at periodic intervals so as to determine how suitable a hose is for continued service.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...