info@wingoil.com         +86-23-63089919         Send A Message

Hydraulic Pressure Test Kit

by:Wingoil     2020-09-12

If the system gained’t hold stress, there's each likelihood that coolant is leaking out someplace. You should pressurize the system around 14 lbs, and you should keep away from going any larger than 18 kilos as this could find yourself inflicting a rupture. There isn't any point in shopping for a coolant stress tester that's not appropriate along with your automobile. So, check that you could really use the package, whether or not you've a daily automotive, SUV, gentle truck or one thing else.

The strain tester connector ought to be spring loaded, so you'll need to push down earlier than you twist the connector and lock it clockwise. Once it is in place, you will need to quickly operate the hand pump as if you are pumping air right into a tire. If there is a downside, that is the purpose that you will notice coolant leaking from one of the areas such because the hose, radiator, or engine.

(m) Specification MC 330, MC 331 cargo tank motor automobiles, and nonspecification cargo tank motor automobiles conforming to § 173.315(k) of this subchapter, supposed for use within the transportation of liquefied compressed gases. Each passive shut-off system installed prior to July 1, 2001, should be certified by a Design Certifying Engineer that it meets the necessities of § 173.315(n) of this subchapter. Modern cooling systems often seal completely at the radiator. Late mannequin autos with degas techniques get rid of vented coolant restoration tanks.

(ii) All self-closing pressure relief valves, including emergency reduction vents and normal vents, have to be faraway from the cargo tank for inspection and testing in accordance with the necessities in paragraph (j) of this section. All reclosing pressure aid valves should be externally inspected for any corrosion or damage which might prevent safe operation.

All reclosing pressure aid valves on cargo tanks carrying lading corrosive to the valve must be faraway from the cargo tank for inspection and testing. Each reclosing stress aid valve required to be removed and examined should be examined in accordance with the requirements set forth in paragraph (j) of this section.

The OTC 6977 test equipment offers a range of adapters for strain testing at hose junctions or a radiator fill neck. Mike’s Oilfield Services Ltd. currently has 7 stress trucks, in its fleet for all your servicing wants. Each strain truck is equipped with a low strain load/unload pump in addition to a high stress triplex and excessive stress hoses. Our operators are experienced in all aspects of stress truck work regarding nicely servicing, hydro testing, inhibitor jobs and chemical jobs and are clean recent water solely (aside from chemicals).

All completely different dimension pressure vans for different jobs – huge or small. Most of those are shade coded to make this task somewhat bit extra straightforward. Once you could have chosen the correct one, you possibly can hook it up to the radiator or coolant reservoir.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...