+ 86-23-63089919 send a message                  

Magnolia Research And Development, Llc

by:Wingoil     2020-08-25

With a most operating temperature of one hundred seventy five°C (347 °F), the Vertex MWD equipment offers a rugged design constructed to withstand essentially the most extremed drilling situations. Acoustic imaging utilizes a motor actuated rotating ultrasonic sign to constantly scan the well bore.

lead time could also be up to four weeks if we don't have the slips and housings in stock. OEM supplies 5.5' for 26# instruments by request only with a 4-6 week lead time. This applies to both Model B Baker style and OEM Quarter flip tools. ALL OEM TOOLS COME STANDARD WITH WICKER SLIPS, SO IF YOU NEED CARBIDE TAG ON A '-TC' FOR TUNGSTEN CARBIDE BUTTONS SLIPS.

The insulation takes place between components within the instruments' axial direction (insulating subs) and/or radial direction (insulating sleeves). The vacuum flask design clearly must additionally incorporate the identical type of electric insulation but upgraded to a higher working temperature. When an current density device is improve with a flask, particular design effort is required to maintain the unique spacing between the supply and detectors whereas not compromising the efficiency of the high attenuation tungsten shielding. Maintaining the unique spacing and optimizing the tungsten shielding avoids the expense and effort of absolutely recharacterizing the device's response.

Other types of gyro instruments such as fiber optic and MEMS have a most operating temperature of 50-85C however have been successfully utilized in many extremely-excessive temperature geothermal applications while in a vacuum flask. Mechanical gyros dissipate watts and require enough heat sink to attain the target down hole duration. Extremely accurate mechanical gyros have a minimum working temperature. In deep water offshore purposes, the gyro have to be thermally insulated from the cold sea bed temperatures encountered within the riser section to keep up the gyro above its minimum working temperature vary. Typically, the sensor is on the bottom of the tool though some designs place the sensor mid length in the tool to allow different tools to be linked below the temperature tool section.

Lorem Ipsum has been the business’s normal dummy text ever for the reason that 1500s, when an unknown printer took a galley of sort and scrambled it to make a kind specimen book. OEM shares a very restricted number of slips and housings for 7-5/8 instruments.

Temperature logging is a basic manufacturing logging measurement. It measures the properly bore fluid's temperature gradient primarily to establish fluid circulate through fluid production or fluid loss. Some sensor designs place the sensor in a protecting airtight thermowell while other designs use a sheathed sensor exposed directly to the properly bore fluid.

The transducer's signal is transmitted by way of the properly bore fluid which requires that the transducer or sign reflector is exposed to the full properly bore temperature. Most acoustic imaging tools additionally incorporate directional sensors such as magnetometers and accelerometers to orient fracture data. The magnetometer part of the software requires non-magnetic flask materials. Most micro imaging tools also incorporate directional sensors such as magnetometers and accelerometers to orient dip and fracture knowledge. Electric insulation is a design requirement of induction and resistivity tools.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...