+ 86-23-63089919 send a message                  

Pool Chemical Injection

by:Wingoil     2020-08-17

Its presence delays the response between calcium magnesium and bicarbonate. This outcomes is scale not forming as the water is being purified by the RO. As the length of the water within the membrane system is comparatively quick during the remedy, scale formation is prevented. As could be seen, the top one hundred thirty of the collet members 116 have an inside shoulder that bears in opposition to an exterior shoulder on the finish of the outboard hub 104.

As such, the actuating piston 112 will be in its uppermost position and bearing against a shoulder fashioned on the connector body a hundred. Also, in this configuration, the end of the poppet 122 is illustrated as bearing against the end of the poppet 128. This will resiliently urge the shoulders of the poppets 122 and 128 away from their seated place.

As a result, fluid is able to move through the interior bore 118 of the connector physique a hundred and through the inside passageway 124 of the outboard hub 104. 5, it may be seen that there's an interior bore 118 fashioned contained in the connector physique 100. A spring one hundred twenty is resiliently mounted in the inside bore 118 of the connector physique 100. A poppet 122 is located inside the inside bore 118 of the connector physique a hundred and has a floor which might bear towards an inside wall of the connector body. Similarly, the outboard hub 104 has an inside passageway 124 that has a spring 126 mounted therein.

The antiscalant additionally incorporates a dispersant which prevents iron or aluminum in water from reacting with the antiscalant and making it ineffective. An antiscalant is a pretreatment injected into the feedwater earlier than the feedwater enters the RO membranes.

This locking configuration is completed by the bearing end 132 of the lock ring 104 strongly urging against the exterior of the tip portion one hundred thirty of the collet members 116. In this locking configuration, there is no hydraulic fluid launched into the interior of the outer sleeve 106.

Poppet 128 has a floor that is designed to seal in relation to the shoulder fashioned on the wall of the interior passageway 124 of the outboard hub 104. 5, there may be proven the vertical connector forty two that's used to connect the hose 16 to the disconnect bundle 20. In particular, the vertical connector 42 is illustrated as having a connector body one hundred that has a hub 102 suitable for connection to the coiled tubing 22 or to the disconnect mechanism 20.

The connector 42 is used in order to connect with an outboard hub 104 that's suitable for connecting with the hose sixteen and/or the weak hyperlink forty six. The connector physique a hundred has an outer sleeve 106 that's slidably and controllably positioned over the outside of the connector physique a hundred. A channel 108 fashioned by way of the wall of the outer sleeve 106 and includes a conduit 110 that is linked to a source of hydraulic fluid. As such, so as to allow the sliding motion of the actuating piston 112, hydraulic fluid can be launched via the conduit one hundred ten in order to trigger the outer sleeve 106 to move from the position proven in FIG. The disconnect mechanism 20 is connected to the manifold 14 via the hose sixteen.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...